First of all, before using the air mattress, it is necessary to check whether the mattress is intact and check whether the air outlet and air outlet are normal. If there is damage or gas leakage, it needs to be repaired in time. In addition, before use, it is necessary to ensure that the field where the air mattress is placed is free of sharp objects, so as not to tear the air mattress.
Next, unroll the air mattress and lay it flat on the floor. Then find the inflation mouth, open the inflation mouth cover, and insert the inflation tube of the air pump into the inflation mouth of the air mattress. When inserting the inflatable tube, keep the insertion port clean to avoid dust entering the inside of the inflatable mattress.
Then, plug the pump's power cord into the power outlet to start the pump. According to the specifications of the air mattress and the required hardness, choose the appropriate inflation time. After the inflation starts, the power of the pump can be adjusted in time to control the inflation speed. In general, the inflation speed should not be too fast to avoid overinflation of the air mattress.
When the charging time reaches the preset time or the required hardness, turn off the charging pump and pull out the charging tube. Then, turn the air mattress slowly so that it is right side up. Check whether the hardness of the air mattress meets the needs, and further inflate it if necessary. At the same time, it is also necessary to check whether there are bubbles or air leakage around the air mattress, and if necessary, repair it in time.
